End-cap bearing integral type

At the factory, the generator’s stator and rotor, end‑cover bearings, and exciter are assembled as a single unit; only the cooler is shipped separately. On site, no further alignment of the stator and rotor centers is required, and this configuration is also more cost‑effective than the pedestal‑bearing type. The air cooler is mounted directly above the generator, with weight and cost falling between the two aforementioned options. Our company’s four‑pole steam turbine generators predominantly employ this design.

Product Category:

  • Product Description
  • Component

    Measurement method

    Temperature Rise Limit

    Stator winding

    Method of Embedding Temperature Sensors Between Upper- and Lower-Level Coils in the Slot

    90 (115) K

    Stator core

    Burying Thermometer Method

    80 (100) K

    Rotor winding

    Resistance method

    90 (115) K

    Aircraft model

    Our company’s generators rated at 3 MW and above can be paired with prime movers operating at four speeds—3,000, 1,500, and 1,800 r/min—and are available in two internationally standard power‑supply frequencies: 50 Hz and 60 Hz. Specifically, the 3,000 r/min configuration corresponds to a 2‑pole salient‑pole generator, while the 1,500 (or 1,800) r/min configurations correspond to 4‑pole salient‑pole generators.

     

    Features

    Our company’s two‑pole and four‑pole steam turbine generators incorporate decades of domestic experience in the design, manufacture, and operation of 3–40 MW units, while also addressing identified shortcomings. In terms of electromagnetic design, we leverage state-of-the-art simulation software and employ the finite element method to optimize the machine, thereby reducing stator slot leakage reactance and end‑windage leakage flux compared with conventional designs. Regarding cooling, we have phased out the noisy, low‑efficiency traditional centrifugal ventilation system, which has resulted in lower vibration and noise levels, enhancing operational reliability and overall efficiency—improving performance by 0.2% to 0.6% relative to national standards and comparable domestic products.

Keywords:

Related Performance

Content is currently being updated…