Seat-type bearing integrated unit
- Product Description
-
Product Overview
Our company’s generators rated at 3 MW and above can be paired with prime movers operating at four speeds—3,000, 1,500, and 1,800 r/min—and are available to meet either the 50 Hz or 60 Hz international standard power‑supply frequency. Specifically, the 3,000 r/min configuration corresponds to a two‑pole salient‑pole generator, while the 1,500 (or 1,800) r/min configurations correspond to four‑pole salient‑pole generators.
Optimized Design
Our company’s two‑pole and four‑pole steam turbine generators incorporate years of domestic experience in the design, manufacture, and operation of 3–40 MW units, while also addressing identified shortcomings. In terms of electromagnetic design, we leverage state-of-the-art simulation software and employ the finite element method to optimize the machine, thereby reducing stator slot leakage reactance and end‑windage leakage flux compared with conventional designs. Regarding cooling, we have phased out the noisy, low‑efficiency traditional centrifugal ventilation system, which has resulted in lower vibration and noise levels, enhancing operational reliability and improving overall efficiency by 0.2% to 0.6% relative to national standards and comparable domestic products.
Keywords:
Related Performance
Chemical Plant Cogeneration Power Station Project
Steam inlet pressure: 3.6 MPa(a)
Steam inlet temperature: 340°C
Type: Condensing Steam Turbine-Generator Unit
Steel Plant’s Own Power Station Project
Steam inlet pressure: 8.3 MPa(a)
Steam inlet temperature: 517°C
Type: Extraction-condensing steam turbine generator set
Product Services
Related products
Content is currently being updated…
Email
OA
WeChat